Part V

From Schematic to Silicon

Turning a verified schematic into a manufacturable layout: analog layout technique, DRC, LVS and extraction, fabrication and packaging, and open tape-out routes that reproduce every result in the course.

Chapter 15

Analog Layout

In layout, geometry becomes performance: matching, parasitics and reliability are decided by how you draw. The same schematic can work or fail depending on the polygons.

Chapter 16

Physical Verification and Post-Layout Simulation

A layout is only finished when it passes design-rule and layout-versus-schematic checks and still meets its specification with the extracted parasitics in place.

Chapter 17

Fabrication, Packaging and Tape-Out

Hundreds of process steps turn your GDS file into transistors and wires. Knowing them explains the design rules, and open shuttles now let a student send a design to a real fab.


Back to top

SkillSurf · The Art of Analog IC Design, draft v0.1 (November 2026). Every source is listed on the References page.

© 2025–2026 SkillSurf. Text, figures and 3D models: CC BY 4.0; code: MIT. The SkillSurf name and logo are not covered.

This course was written with the help of AI tools and may contain mistakes. If you find one, please tell us through SkillSurf or email skillsurfedu@gmail.com, and we will correct it.

This site uses Just the Docs, a documentation theme for Jekyll.