Lab 2

gm/ID Lookup Tables

Produce the four gm/ID charts of your PDK from the characterization testbench, see which of them move with the process corner, and size a stage from the lookup tables.

Contents
Lab 2 at a glance  
Goal Produce the four gm/ID charts of your PDK from the characterization testbench, see which of them move with the process corner, and size a stage from the lookup tables.
Reproduces Chapter 6 (Sections 6.3–6.6, Figures 6.3 and 6.5, Worked example 6.1, Table 6.1)
Time 2 hours
Files labs/lab2: gmid_tb, cs_tb (.sch) per PDK; charts.py, size_cs.py

Hand calculation

Worked example 6.1 asks for a unity-gain frequency of 50 MHz into 2 pF at \(g_m/I_D\) = 15 V⁻¹. Compute \(g_m\) and \(I_D\), then use the gain chart of Figure 6.3(b) to decide the shortest length that gives \(g_m/g_{ds} \ge 30\) in your PDK.

Steps

  1. The charts. Run ../../sim.sh gmid_tb.sch: four NMOS devices of W = 5 µm (Lmin, 0.5, 1 and 2 µm) sit in parallel between one gate and one drain source, as in Figure 6.5, and the .save line keeps the operating point of each at every step of the gate sweep. The NGSPICE block computes \(g_m/I_D\), \(I_D/W\), \(f_T\) (with the overlap capacitances in \(C_{gg}\)) and \(g_m/g_{ds}\) for each length, prints them at \(g_m/I_D\) = 15, and writes them to simulations/gmid.txt. python3 ../charts.py plots the four charts into simulations/charts.png.
  2. The slow corner. Run ../../corners.py gmid_tb.sch --corners tt,ss and compare the two rows. Which quantities move by more than 5 %?
  3. Size the stage. python3 ../size_cs.py follows the recipe of Section 6.5 with the course’s tables (tools/data/) and prints W, L and the predicted \(V_{GS}\), gain and \(f_u\).
  4. Simulate the stage. cs_tb.sch holds the transistor of step 3 with an ideal 41.9 µA load, 2 pF and the slow DC servo of Section 6.6, which holds the output at \(V_{DD}/2\). Run ../../sim.sh cs_tb.sch and compare with the prediction.

Checkpoint

Table 18.3. Lab 2 results (NMOS, VDS = VDD/2, tt, 27 °C).

Quantity SG13G2 SKY130
At \(g_m/I_D\) = 15, L = 0.5 µm: \(V_{GS}\), \(I_D/W\) 0.342 V, 3.26 µA/µm 0.710 V, 2.98 µA/µm
\(f_T\) at \(g_m/I_D\) = 15, L = Lmin / 0.5 / 2 µm 9.75 / 2.18 / 0.179 GHz 16.2 / 2.36 / 0.196 GHz
\(g_m/g_{ds}\) at \(g_m/I_D\) = 15, L = Lmin / 0.5 / 1 / 2 µm 16.7 / 26.4 / 32.9 / 40.7 22.0 / 130 / 175 / 202
ss corner, L = 0.5 µm: \(V_{GS}\), \(I_D/W\), \(f_T\), gain at \(g_m/I_D\) = 15 0.391 V, 3.19 µA/µm, 2.17 GHz, 26.1 0.731 V, 2.68 µA/µm, 2.12 GHz, 138
size_cs.py: W/L, predicted \(V_{GS}\), gain, \(f_u\) 18.05/0.75 µm (2 fingers), 325 mV, 30.1, 49.9 MHz 4.62/0.18 µm, 775 mV, 42.9, 49.9 MHz
cs_tb: \(V_{GS}\), \(g_m\), gain, \(f_u\) 311 mV, 633 µS, 30.7, 50.0 MHz 775 mV, 622 µS, 42.4, 49.4 MHz

Questions

  • The ss corner moves \(V_{GS}\) at a given \(g_m/I_D\) by 49 mV in SG13G2, yet \(f_T\) and the gain move by less than 2 % (by up to 10 % in SKY130). Why is a design that is specified in \(g_m/I_D\) robust against corners, and what does still change?
  • The tables predicted \(V_{GS}\) = 325 mV for the SG13G2 stage, and the servo found 311 mV. The tables were built with one 5 µm finger; the stage uses two 9 µm fingers. Which effect of the pitfall in Section 6.6 explains the 14 mV?
  • The SG13G2 transistor has 14 times the gate capacitance of the SKY130 one. Read both \(C_{gg}\) values from size_cs.py and say what this means for the stage that drives it.

Extension

Add four PMOS devices to gmid_tb.sch (upside down, as in Lab 1) and plot their charts. Then rerun size_cs.py with \(g_m/I_D\) = 20 instead of 15 (edit GM_ID): what happens to the current, the width, the gain and \(f_T\), and does the stage still reach 50 MHz in cs_tb?


Back to top

SkillSurf · The Art of Analog IC Design, draft v0.1 (November 2026). Every source is listed on the References page.

© 2025–2026 SkillSurf. Text, figures and 3D models: CC BY 4.0; code: MIT. The SkillSurf name and logo are not covered.

This course was written with the help of AI tools and may contain mistakes. If you find one, please tell us through SkillSurf or email skillsurfedu@gmail.com, and we will correct it.

This site uses Just the Docs, a documentation theme for Jekyll.