Part III

Building Blocks

The circuits every amplifier is made of: single-transistor stages, current mirrors and bias generators, frequency response, and the differential pair that becomes our first operational transconductance amplifier.

Chapter 7

Single-Transistor Amplifiers

Three ways to connect one transistor (common source, common gate and common drain) give three amplifiers with very different gain and impedances. Cascoding combines them.

Chapter 8

Current Mirrors and Biasing

Analog circuits run on currents copied from a single reference. A good mirror copies accurately over a wide voltage range, and a good reference does not care about the supply.

Chapter 9

Frequency Response

Every node has capacitance, so every amplifier has poles. Finding the dominant ones by inspection is the skill that makes compensation and bandwidth design possible.

Chapter 10

The Differential Pair and the 5T OTA

Two matched transistors sharing a tail current reject everything their inputs have in common. Add a current-mirror load and you have the five-transistor OTA, the simplest complete amplifier.


Back to top

SkillSurf · The Art of Analog IC Design, draft v0.1 (November 2026). Every source is listed on the References page.

© 2025–2026 SkillSurf. Text, figures and 3D models: CC BY 4.0; code: MIT. The SkillSurf name and logo are not covered.

This course was written with the help of AI tools and may contain mistakes. If you find one, please tell us through SkillSurf or email skillsurfedu@gmail.com, and we will correct it.

This site uses Just the Docs, a documentation theme for Jekyll.