Part II

The Transistor

Everything an analog designer needs from device physics: the MOSFET in all its operating regions, its small-signal model, and the gm/ID method that turns simulated device data into transistor sizes.

Chapter 4

The MOSFET for Circuit Designers

A MOSFET is a voltage-controlled charge reservoir. Once you see it that way, the square law, its many corrections and the subthreshold region all follow from one picture.

Chapter 5

Small-Signal Models and Device Characterization

Amplifiers work on small changes around a bias point. The small-signal model captures those changes with a handful of conductances and capacitances, and a simulator can measure every one of them.

Chapter 6

The gm/ID Design Methodology

Instead of trusting an equation that no longer fits modern transistors, gm/ID design reads the transistor's real behaviour from simulated tables and sizes every device from three choices: gm/ID, L and current.


Back to top

SkillSurf · The Art of Analog IC Design, draft v0.1 (November 2026). Every source is listed on the References page.

© 2025–2026 SkillSurf. Text, figures and 3D models: CC BY 4.0; code: MIT. The SkillSurf name and logo are not covered.

This course was written with the help of AI tools and may contain mistakes. If you find one, please tell us through SkillSurf or email skillsurfedu@gmail.com, and we will correct it.

This site uses Just the Docs, a documentation theme for Jekyll.