Part IV

Amplifier Design

From building blocks to a complete amplifier: feedback and stability, the two-stage Miller OTA designed to a specification in both PDKs, noise and mismatch, and the references that bias it all.

Chapter 11

Feedback, Stability and Compensation

Feedback trades gain for precision, but every extra pole is a step toward oscillation. Phase margin tells you how close you are, and compensation is how you buy it back.

Chapter 12

The Two-Stage Miller OTA

The course project: a two-stage Miller-compensated OTA designed to the same specification in SG13G2 and SKY130, sized with gm/ID and verified across corners.

Chapter 13

Noise and Mismatch

Two random effects limit every analog circuit: noise, which changes from moment to moment, and mismatch, which is frozen in when the chip is made. Both are predictable, and both can be designed for.

Chapter 14

Voltage References and Regulators

A bandgap reference adds a voltage that rises with temperature to one that falls with it, and the sum barely moves. A regulator then turns that reference into a clean supply.


Back to top

SkillSurf · The Art of Analog IC Design, draft v0.1 (November 2026). Every source is listed on the References page.

© 2025–2026 SkillSurf. Text, figures and 3D models: CC BY 4.0; code: MIT. The SkillSurf name and logo are not covered.

This course was written with the help of AI tools and may contain mistakes. If you find one, please tell us through SkillSurf or email skillsurfedu@gmail.com, and we will correct it.

This site uses Just the Docs, a documentation theme for Jekyll.