Preface

This course is for anyone who wants to design the circuits of a radio and has a laptop. You need no licences and no non-disclosure agreements: an open process, open simulators and some circuit theory are enough to go from a specification to a verified design.

Contents

Who this course is for

The course is written for final-year undergraduates and graduate students in electrical and electronic engineering, and for analog, digital or board-level engineers who want to understand what happens inside a radio chip. It assumes you are comfortable with:

  • circuit analysis: phasors, transfer functions, poles and zeros, and two-port networks;
  • analog IC design at the level of SkillSurf’s The Art of Analog IC Design: MOSFET models, small-signal analysis, gm/ID sizing, amplifier stages, feedback and noise;
  • signals and systems: Fourier transforms, spectra and filtering;
  • a little Python, enough to run a script and change a number in it.

Electromagnetics helps but is not required: Chapter 3 develops the transmission-line and S-parameter ideas the course needs.

How to read it

The course has six parts. Read Parts I and II first; after that, the receiver, synthesizer and transmitter parts can be read in any order.

Part Chapters You will be able to
I · RF fundamentals 1–5 Simulate an RF circuit with open tools, read S-parameters and the Smith chart, budget noise and linearity, and choose a transceiver architecture.
II · Devices and passives 6–8 Choose and size transistors for gigahertz operation, model on-chip inductors and capacitors, and design matching networks.
III · The receiver 9–11 Design and verify an LNA, a mixer and an LC VCO.
IV · Frequency synthesis 12–15 Design a PLL for phase noise, build dividers, and analyse fractional-N and digital synthesizers.
V · The transmitter 16–17 Design a power amplifier for output power, efficiency and linearity, at 2.4 GHz and at 50 GHz.
VI · From silicon to system 18–19 Lay out RF blocks, verify them with electromagnetic simulation, and assemble a transceiver.

Every chapter follows the same rhythm: physical idea → equation → hand calculation → simulation → what it means for your design. Boxes mark the recurring elements: key equations, worked examples, insights, common pitfalls, things to try, and notes comparing processes.

The tools

Everything runs in IIC-OSIC-TOOLS release 2026.10, a Docker image with the PDKs and every tool preinstalled, on Linux, macOS or Windows. The course uses:

  • ngspice for operating point, AC, noise and S-parameter analyses, and transient simulation;
  • Xyce for harmonic balance: gain compression, intermodulation, output power and efficiency;
  • openEMS and Palace, with IHP’s workflows for the SG13G2 layer stack, for electromagnetic simulation of inductors, transmission lines and layouts;
  • Xschem and KLayout for schematics and layout, and Python (NumPy, SciPy, Matplotlib) to drive the simulators and plot the results.

Chapter 2 explains what each simulator does and when to use it. The scripts in the course repository’s tools/figs/ folder produce every plot and number in the text, and each chapter ends with the command that reproduces it.

Conventions

  • Powers are in dBm (decibels relative to 1 mW) and impedances are referred to \(Z_0\) = 50 Ω unless stated otherwise.
  • Noise figures are in dB; intercept points are input-referred (IIP3) unless marked as output-referred (OIP3).
  • Numbers come from simulations at the typical corner and 27 °C unless stated otherwise. They are rounded to the precision the models justify.
  • Spelling is British (behaviour, modelling, analyse) with -ize endings (characterize, optimize).

Acknowledgements

The structure of this course owes much to Prof. Harald Pretl’s Radio-Frequency Integrated Circuits course at JKU Linz, Prof. Sam Palermo’s ECEN 620 at Texas A&M, the IHP Analog Academy, and the textbooks of Behzad Razavi, Thomas Lee and David Pozar. The open PDK from IHP and the IIC-OSIC-TOOLS image from JKU make it possible. All text and figures are original; every source is cited where it is used and listed on the References page.


Back to top

SkillSurf · RFIC Design with Open-Source Tools, draft v0.1 (November 2026). Every source is listed on the References page.

This course was written with the help of AI tools and may contain mistakes. If you find one, please tell us through SkillSurf or email skillsurfedu@gmail.com, and we will correct it.

This site uses Just the Docs, a documentation theme for Jekyll.