Part I · Foundations

RF Fundamentals

What makes radio-frequency design different, the open-source simulators that handle it, and the language of the field: transmission lines, S-parameters and the Smith chart, noise figure and intercept points, modulation and the architecture of a transceiver.

Chapter 1

Why RF, Why Open Source

Radios everywhere, what makes RF design different, silicon processes for RF, the open-source RF flow and the course radio.

Gallery

RF Devices in 3D

Rotate and take apart the RF devices of SG13G2 in 3D: the metal stack, RF MOSFET and HBT cells, MIM capacitor, varactor, spiral, transformer, microstrip, GSG pads and a 50 GHz matching network.

Chapter 2

Simulating RF Circuits

AC, S-parameter and noise analysis in ngspice, harmonic balance in Xyce, transient methods and electromagnetic solvers, and when to use which.

Chapter 3

Transmission Lines, the Smith Chart and S-Parameters

Reflections and standing waves, the Smith chart, two-port parameters, power gains and stability.

Chapter 4

Noise and Linearity

Noise figure and sensitivity, gain compression, intermodulation and intercept points, and the dynamic range of a cascade.

Chapter 5

Modulation and Transceiver Architectures

Digital modulation, the image problem, heterodyne, zero-IF and low-IF receivers, I/Q imbalance and the course radio's link budget.


Back to top

SkillSurf · RFIC Design with Open-Source Tools, draft v0.1 (November 2026). Every source is listed on the References page.

This course was written with the help of AI tools and may contain mistakes. If you find one, please tell us through SkillSurf or email skillsurfedu@gmail.com, and we will correct it.

This site uses Just the Docs, a documentation theme for Jekyll.